Gigabyte GA-6UASL1 User Manual page 51

Options available: Enabled/Disabled. Default setting is Enabled.
TPM State
Select Enabled to activate TPM State function.
Options available: Enabled/Disabled. Default setting is Enabled.
Pending TPM Support
Schedule TPM operation.
Options available: None/Enable Take Ownership.
Current TPM Status Information
Display current TPM status information.
Setting a System Password
1. Use the up/down keys to select a password parameter (Set Administrator Password or Set User
Password), then press Enter.
A password box will appear.
2. Type a password then press Enter.
3. The password may consist of up to eight alphanumeric characters (A-Z, a-z, 0-9).
4. Retype the password to verify the first entry then press Enter again.
5. Press F10. 5. Select Yes to save the new password and close the Setup Utility.
Changing a System Password
1. Use the up/down keys to select a password parameter (Set Administrator Password or Set User
Password), then press Enter.
Type the original password then press Enter.
2.
3. Type a new password then press Enter.
Retype the password to verify the first entry then press Enter again.
4.
Press F10.
5.
6. Select Yes to save the modified password and close the Setup Utility.
Removing a System Password
1. Use the up/down keys to select a password parameter (Set Administrator Password of Set User
Password), then press Enter.
2. Enter the current password then press Enter.
3. Press Enter twice without entering anything in the new and confirm password fields. After doing
this, the system automatically sets the related password parameter to Clear.
- 51 - BIOS Setup