Pcipnp - Asus A8N-SLI - Motherboard - ATX User Manual

MTRR mapping mode [Continuous]
Sets the MTRR mapping mode.
Configuration options: [Continuous] [Discrete]
Errata 94 Enhanced [Auto] Errata 94 Enhanced [Auto]
Errata 94 Enhanced [Auto] Errata 94 Enhanced [Auto] Errata 94 Enhanced [Auto]
Configuration options: [Auto] [Disabled]
2.4.3 2.4.3

PCIPnP

PCIPnP
2.4.3 2.4.3 2.4.3 PCIPnP PCIPnP PCIPnP
The items in this menu show the PCIPnP configuration settings. Select an
item then press <Enter> to display a pop-up menu with the configuration
options.
Plug & Play O/S
Init Display First
Resources Controlled By
x IRQ Resources
PCI/VGA Palette Snoop
Plug & Play OS [Yes] Plug & Play OS [Yes] Plug & Play OS [Yes] Plug & Play OS [Yes] Plug & Play OS [Yes]
Select [Yes] if you are using a Plug and Play capable operating system.
Select [No] if you need the BIOS to configure non-boot devices.
Configuration options: [No] [Yes]
Init Display First [PCIEx] Init Display First [PCIEx]
Init Display First [PCIEx] Init Display First [PCIEx] Init Display First [PCIEx]
Allows you to select which graphics controller to use as the primary boot
device. Configuration options: [PCI slot] [PCIEx]
Resources Controlled By [Auto Resources Controlled By [Auto Resources Controlled By [Auto
Resources Controlled By [Auto Resources Controlled By [Auto
When set to [Auto(ESCD)], this allows the BIOS to automatically configure
all the boot and Plug and Play devices. When set to [Manual], you can
assign the available IRQ resources to the PCI devices.
Configuration options: [Auto] [Manual]
2 - 2 0 2 - 2 0
2 - 2 0 2 - 2 0 2 - 2 0
PCIPnP
[Yes]
[PCIEx]
[Auto]
[Disabled]
Select Menu
Item Specific Help
Select Yes if you are
using a Plug and Play-
capable operating
system. Select No if
you need the BIOS to
configure non-boot
devices.
C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p
C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p