Pcipnp; Led Control - Asus Crosshair IV Extreme Manual

3.5.5

PCIPnP

The PCIPnP menu items allow you to change the advanced settings for PCI/PnP
devices.
Advanced
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S
Plug And Play O/S �No�
[Yes] When set to [Yes] and if you install a Plug and Play operating
system, the operating system configures the Plug and Play devices
not required for boot.
[No] When set to [No], BIOS configures all the devices in the system.
3.5.6

LED Control

The LED Control menu items allow you to change the advanced settings for the
onboard LEDs.
Take caution when changing the settings of the LED Control menu items.
Incorrect field values can cause the system to malfunction.
Advanced
LED Control
All LED Control
ROG Logo
POST State LEDs
Voltiminder LED
CPU LED Selection
NB LED Selection
SB LED Selection
DDR LED Selection
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
All LED Control �Enabled�
Allows you to enable or disable the onboard LEDs control.
Configuration options: [Enabled] [Disabled]
ROG Crossfire IV Extreme
BIOS Setup UTILITY
[No]
Crossfire IV Extreme BIOS Setup
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[CPU]
[NB]
[SB]
[DRAM]
NO: lets the BIOS
configure all the
devices in the
system.
Version 0243
←→ Select Screen
↑↓ Select Item
F1 General Help
F10 Save and Exit
ESC Exit
3-29