Installing The Memory; Dimm Population Table - Gigabyte GA-6PXSV1 User Manual

1-4-2 Installing a Memory
Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR3 DIMMs on this motherboard.
Installation Step:
Step 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
Step 2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
Note: For dual-channel and four-channel operation, DIMMs must be installed in matched pairs.
Step 3. Reverse the installation steps when you wish to remove the DIMM module.

1-4-3 DIMM Population Table

1N or 2N DIMM1
1N Empty
1N Empty
1N Empty
1N Single-Rank
R-DIMM
1N Single-Rank
1N Dual-Rank
1N Single-Rank
1N Dual-Rank
1N Quad-Rank
1
2
DIMM0
Single-Rank
Dual-Rank
Quad-Rank
Single-Rank
Dual-Rank
Dual-Rank
Quad-Rank
Quad-Rank
Quad-Rank
- 18 -
2
1N or 2N DIMM1 DIMM0
1N Empty Single-Rank
1N Empty Dual-Rank
U-DIMM
2N Single-Rank Single-Rank
2N Single-Rank Dual-Rank
2N Dual-Rank Dual-Rank
Hardware Installation