Gigabyte GA-6VM7A+ User Manual
Gigabyte GA-6VM7A+ User Manual

Gigabyte GA-6VM7A+ User Manual

Socket 370 processor motherboard
Hide thumbs Also See for GA-6VM7A+:

Advertisement

Quick Links

DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Mother Board
GA-6VM7A+
Model Number:
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)
This device may not cause harmful
and
(2)
this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name:
ERIC LU
Eric Lu
Signature:
Date:
Feb. 11, 2000
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device ,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection
against
harmful
residential
installations.
generates,
uses,
and
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
interference
in
This
equipment
can
radiate
radio

Advertisement

Table of Contents
loading

Summary of Contents for Gigabyte GA-6VM7A+

  • Page 1 FCC Compliance Statement: This equipment has been tested and found to DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) comply with limits for a Class B digital device , pursuant to Part 15 of the FCC rules. These Responsible Party Name: G.B.T.
  • Page 2: Declaration Of Conformity

    Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-6VM7A+ is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive EN 55011...
  • Page 3 6VM7A+ Socket 370 Processor Motherboard USER'S MANUAL Socket 370 Processor Motherboard REV. 1.0 First Edition R-10-01-000131...
  • Page 5 How This Manual Is Organized This manual is divided into the following sections: 1) Revision History Manual revision information 2) Item Checklist Product item list 3) Features Product information & specification 4) Hardware Setup Instructions on setting up the motherboard 5) Performance &...
  • Page 7: Table Of Contents

    Table Of Content Revision History Item Checklist Summary of Features 6VM7A+ Motherboard Layout Page Index for CPU Speed Setup / Connectors / Panel and Jumper Definition Performance List P.25 Block Diagram P.26 Memory Installation P.27 Page Index for BIOS Setup P.28 Appendix P.55...
  • Page 8: Revision History

    6VM7A+ Motherboard Revision History Revision Revision Note Date Initial release of the 6VM7A+ motherboard user’s Jan.2000 manual. The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners.
  • Page 9: Item Checklist

    Item Checklist Item Checklist The 6VM7A+ motherboard Cable for IDE / floppy device Diskettes or CD (TUCD) for motherboard driver & utility Internal COM B Cable (Optional) Internal USB Cable (Optional) Cable for SCSI device 6VM7A+ user’s manual...
  • Page 10: Summary Of Features

    6VM7A+ Motherboard Summary Of Features 24.3 cm x 21.0 cm micro ATX size form factor, 4 layers Form Factor PCB. Socket 370 processor 2nd cache in CPU(Depend on CPU) Chipset VT82C693A VT82C686A Clock Generator ICS 9248DF-39 66/100/133 MHz system bus speeds (PCI 33MHz) 75/83/112/124/140/150 MHz system bus speeds (PCI 44MHz) (reserved) Memory...
  • Page 11 Summary of Features BIOS Licensed Award BIOS, 2M bit flash ROM On-Board Sound Creative CT5880 Line In / Line Out / Mic In / AUX In / CD In / TEL / SPDIF / Game port Additional Features Includes 3 fan power connectors. Poly fuse for keyboard over-current protection...
  • Page 12: 6Vm7A+ Motherboard Layout

    6VM7A+ Motherboard 6VM7A+ Motherboard Layout PS/2 JP19 JP16 PGA 370 JP15 VT82C 693A 6VMA7+ BAT1 AGP 1 JP23 PCI1 BIOS PCI2 VT82C CT5880 686A PCI3...
  • Page 13: Page Index For Cpu Speed Setup / Connectors / Panel And Jumper

    6VM7A+ Motherboard Layout Page Index for CPU Speed Setup / Connectors / Panel and Jumper Page Definition CPU Speed Setup Connectors P.14 Game & Audio Port P.14 COM A / COM B / LPT Port P.14 USB Connector P.15 PS/2 Keyboard & PS/2 Mouse Connector P.15 JP16 (CPU Cooling Fan Power Connector) P.16...
  • Page 14: Cpu Speed Setup

    6VM7A+ Motherboard CPU Speed Setup The system bus speed is selectable at 66,100,133MHz and Auto. The user can select the system bus speed (SW1) and change the DIP switch (SW2) selection to set up the CPU speed for 300 - 733MHz processor. Set System Bus Speed SW1: O : ON, X : OFF...
  • Page 15 CPU Speed Setup For Auto Jumper Setting: Note: 1. If you use 66/100/1333 MHz CPU, We recommend you to setup your system speed to “Auto” value. 2. We don’t recommend you to set up your system speed to 75 , 83 , 112 , 124 , 140 ,150 MHz because these frequencies are not the standard specifications for CPU, Chipset most peripherals.
  • Page 16 6VM7A+ Motherboard Celeron 333/ 66 MHz FSB Celeron 366/ 66 MHz FSB Celeron 400/ 66 MHz FSB 5. Celeron 433/ 66 MHz FSB...
  • Page 17 CPU Speed Setup 6. Celeron 466/ 66 MHz FSB 7. Celeron 500/ 66 MHz FSB 8. Celeron 533/ 66 MHz FSB 9. Celeron 566/ 66 MHz FSB...
  • Page 18 6VM7A+ Motherboard 10. Cryix Joshua 300/100MHz FSB 11. Coppermine 500/100MHz FSB 12. Coppermine 550/100MHz FSB 13. Coppermine 600/100MHz FSB...
  • Page 19 CPU Speed Setup 14. Coppermine 650/100MHz FSB 15. Coppermine 700/100MHz FSB 16. Coppermine 533/133MHz FSB 17. Coppermine 600/133 MHz FSB...
  • Page 20 6VM7A+ Motherboard 18. Coppermine 667/133MHz FSB 19. Coppermine 733/133MHz FSB...
  • Page 21: Connectors

    Connectors Connectors Game & Audio Port Game Port Line Out Line In COM A / COM B / LPT Port LPT Port COM B COM A...
  • Page 22: Definition

    6VM7A+ Motherboard USB Connector Pin No. Definition USB V0 USB D0- USB D0+ USB V1 USB D1- USB D1+ 1 2 3 4 PS/2 Keyboard & PS/2 Mouse Connector PS/2 Mouse PS/2 Keyboard PS/2 Mouse/ Keyboard Pin No. Definition Data VCC(+5V) Clock...
  • Page 23: Jp16: Cpu Cooling Fan Power Connector

    Connectors JP16: CPU Cooling Fan Power Connector Pin No. Definition +12V SENSE JP15: Power Cooling Fan Power Connector Pin No. Definition +12V...
  • Page 24: Jp2 (System Cooling Fan Power Connector)

    6VM7A+ Motherboard JP2: Sysem Cooling Fan Power Connector Pin No. Definition +12V SENSE ATX Power Pin No. Definition 3,5,7,13, 11 1 15-17 1,2,11 3.3V 4,6,19,20 +12V -12V Power Good 20 10 5V SB stand by+5V PS-ON(Soft On/Off)
  • Page 25: Floppy Port

    Connectors Floppy Port Red Line FDD1 IDE1(Primary), IDE2(Secondary) Port Red Line IDE 1 IDE 2...
  • Page 26: J7 (Tel)

    6VM7A+ Motherboard J7 : TEL: The connector is for Modem with internal voice connector Pin No. Definition Signal-In Signal-Out J5:AUX_IN Pin No. Definition AUX-L AUX-R...
  • Page 27: J8 (Cd Audio Line In)

    Connectors J8 : CD Audio Line In Pin No. Definition CD-L CD-R J4 : SPDIF(The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital decoder.) Pin No. Definition SPDIF OUT...
  • Page 28: Panel And Jumper Definition

    6VM7A+ Motherboard Panel and Jumper Definition J2 : 2x11 Pins Jumper P+P P S P K GN (Green Switch) Open: Normal Operation Close: Entering Green Mode GD (Green LED) Pin 1: LED anode(+) Pin 2: LED cathode( ) HD (IDE Hard Disk Active LED) Pin 1: LED anode(+) Pin 2: LED cathode( ) SPK (Speaker Connector)
  • Page 29: Jp1 (Clear Cmos Function)

    Panel and Jumper Definition JP1 : Clear CMOS Function Pin No. Definition 1-2 close Normal (Default) 2-3 close Clear CMOS JP3 : Onboard Sound Function Selection Pin No. Definition 1-2 close Onboard Sound Enable(Default) 2-3 close Onboard Sound Disable...
  • Page 30: Jp23 (Case Open)

    6VM7A+ Motherboard JP23 : Case Open Pin No. Definition Signal JP19 : Support Cyrix CPU Selection(Optional) Pin No. Definition open Normal close Support Cyrix 133MHz...
  • Page 31: Bat1(Battery)

    Panel and Jumper Definition BAT1 : Battery Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
  • Page 32: Performance List

    6VM7A+ Motherboard Performance List The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) Intel Coppermine Socket 370 Processor...
  • Page 33: Block Diagram

    Block Diagram Block Diagram 14.318MHz PGA 370 CPU 3.3V DIMM AGP 2X DIMM Sockets Host Bus AGP Bus VT82C693A Ultra DMA 33/ATA66 IDE Ports 33 MHz 9248DF-39 PCI Bus 33 MHz 24MHz 48MHz IDE Bus 14.318MHz VT82C686A COM Ports Creative AC’97-Link CT5880 Floppy...
  • Page 34: Memory Installation

    6VMA7+ Motherboard Memory Installation The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot .The DIMM module can only fit in one direction due to the two notch. Memory size can vary between sockets.
  • Page 35: Page Index For Bios Setup

    BIOS Setup Page Index for BIOS Setup Page The Main Menu P.30 Standard CMOS Setup P.32 BIOS Features Setup P.36 Chipset Features Setup P.39 Power Management Setup P.41 PNP/ PCI Configuration P.44 Load BIOS Defaults P.46 Load Performance Defaults P.47 Integrated Peripherals P.48 Supervisor Password / User Password...
  • Page 36: Entering Setup

    6VM7A+ Motherboard BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. ENTERING SETUP Power ON the computer and press <Del>...
  • Page 37: Getting Help

    BIOS Setup GETTING HELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.
  • Page 38 6VM7A+ Motherboard Chipset Features Setup This setup page includes all the items of chipset special features. Power Management Setup This setup page includes all the items of Green function features. PnP/PCI Configurations This setup page includes all the configurations of PCI & PnP ISA resources. Load BIOS Defaults Bios Defaults indicates the value of the system parameter which the system would be in the safe configuration.
  • Page 39: Standard Cmos Setup

    BIOS Setup Standard CMOS Setup The items in Standard CMOS Features Menu (Figure 2) are divided into 9 categories. Each category includes no, one or more than one setup items. Use the arrows to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item. ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC.
  • Page 40 6VM7A+ Motherboard IDE Primary Master, Slave / Secondary Master, Slave The category identifies the types of hard disk from drive C to F that has been installed in the computer. There are two types: auto type, and user definable type. User type is user-definable;...
  • Page 41 BIOS Setup Video The category detects the type of adapter used for the primary system monitor that must match your video display card and monitor. Although secondary monitors are supported, you do not have to select the type in setup. EGA/VGA Enhanced Graphics Adapter/Video Graphics Array.
  • Page 42 6VM7A+ Motherboard Extended Memory The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1 MB in the CPU's memory address map. Other Memory This refers to the memory located in the 640 K to 1024 K address space. This is memory that can be used for different applications.
  • Page 43: Bios Features Setup

    BIOS Setup BIOS Features Setup ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. Virus Warning : Disabled Process Number Feature : Enabled Boot From LAN First : Disabled Boot Sequence : A,C,SCSI VGA Boot From : AGP Boot Up Floppy Seek : Enabled Boot Up NumLock Status...
  • Page 44 6VM7A+ Motherboard Boot From LAN First Enabled Enable Boot From LAN First. Disabled Disable Boot From LAN First. (Default Value) Auto Auto detect Boot From LAN First. You can set “Auto” or “Enabled” to boot from LAN first. Boot Sequence This category determines which drive computer searches first for the disk operating system (i.e., DOS).
  • Page 45 BIOS Setup Typematic Rate Setting Enabled Enable Keyboard Typematic rate setting. Disabled Disable Keyboard Typematic rate setting. (Default Value) Typematic Rate (Chars / Sec.) 6-30 Set the maximum Typematic rate from 6 chars. Per second to 30 characters. Per second. (Default Value: 6 ) Typematic Delay (Msec.) 250-1000 Set the time delay from first key to repeat the same key in to computer...
  • Page 46: Chipset Features Setup

    6VM7A+ Motherboard Chipset Features Setup ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC : 42℃/107℉ Top Performance :Disabled Current CPU Temp. : 28℃/82℉ SDRAM Cycle Length Current System Temp. DRAM Clock :Host CLK Current CPU FAN 1 Speed :5978 RPM Read Around Write :Enabled...
  • Page 47 BIOS Setup Concurrent PCI/Host Enabled Concurrent PCI/Host. Enabled Disabled Disabled Concurrent PCI/Host. (Default Value) AGP Aperture Size Set AGP Aperture Size to 4MB. Set AGP Aperture Size to 8 MB. 16MB Set AGP Aperture Size to 16 MB. 32MB Set AGP Aperture Size to 32 MB. 64MB Set AGP Aperture Size to 64 MB.
  • Page 48: Power Management Setup

    6VM7A+ Motherboard Power Management Setup ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC Power Management :Enabled Primary INTR Video Off Method :DPMS Support IRQ 3 (COM 2) :Primary Soft-Off by PWRBTN :Instant-Off IRQ 4 (COM 1) :Primary PWRON After PW-Fail :Formar-Sts...
  • Page 49 BIOS Setup PWRON After PW-Fail Former-Sts Set Restore on AC/Power Loss is Former-Sts mode. (Default Value) Set Restore on AC/Power Loss is Power on. Set Restore on AC/Power Loss is Power off. CPU FAN In Suspend Disable this function. Stop CPU FAN when entering Suspend mode. (Default Value) HDD Power Down Disabled Disabled HDD Power Down mode function.
  • Page 50 6VM7A+ Motherboard Wake Up On RI# Enable Wake Up On LAN/Ring. (Default Value) Enabled Disabled Disable Wake Up On LAN/Ring. Wake Up On PME# Enable Wake Up On PME#.(Default Value) Enabled Disabled Disable Wake Up On PME#. RTC Alarm Resume You can set “RTC Alarm Resume”...
  • Page 51 BIOS Setup PNP/PCI Configurations ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. PNP OS Installed Assign IRQ For USB :Enabled Resources Controlled By :Auto Reset Configuration Data :Disabled IRQ-3 assigned to :PCI/ISA PnP IRQ-4 assigned to :PCI/ISA PnP IRQ-5 assigned to :PCI/ISA PnP...
  • Page 52 6VM7A+ Motherboard IRQ (3,4,5,7,9,10,11,12,14,15), DMA(0,1,3,5,6,7) assigned to IRQ[3.4.5.7.9.10.11.12.14.15] & DMA[0.1.3.5.6.7]These items will show up when “Resources Controlled By” is Manual. PCI/ISA PnP The resource is used by PCI/ISA PnP device (PCI or ISA). Legacy ISA The resource is used by Legacy ISA device. Assign IRQ For USB Enabled Assign a specific IRQ for USB.
  • Page 53: Pnp/Pci Configuration

    BIOS Setup Load BIOS Defaults ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP SUPERVISOR PASSWORD CHIPSET FEATURES SETUP USER PASSWORD POWER MANAGEMENT SETUP IDE HDD AUTO DETECTION PNP/PCI CONFIGURATION SAVE &...
  • Page 54: Load Performance Defaults

    6VM7A+ Motherboard Load Performance Defaults ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP SUPERVISOR PASSWORD CHIPSET FEATURES SETUP USER PASSWORD POWER MANAGEMENT SETUP IDE HDD AUTO DETECTION PNP/PCI CONFIGURATION SAVE &...
  • Page 55: Integrated Peripherals

    BIOS Setup Integrated Peripherals ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. USB Controller : Enabled USB Keyboard Support : Disabled Onboard Serial Port 1 : Auto Onboard Serial Port 2 : Auto Onboard Parallel Port :378/IRQ7 Onboard Parallel Mode :SPP...
  • Page 56 6VM7A+ Motherboard Onboard Serial Port 2 Auto BIOS will automatically setup the port 2 address. (Default Value) 3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8. 2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8. 3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8. 2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8.
  • Page 57 BIOS Setup SB DMA Select DMA 0 / 1 / 2/ 3(Default Value: 1 ). MPU-401 Enabled Enabled MPU-401. Disabled Disabled MPU-401. (Default Value) MUP-401 I/O Address 330-333H Set MUP-401 I/O Address is 330-333H. (Default Value). 300-303H Set MUP-401 I/O Address is 300-303H. 310-313H Set MUP-401 I/O Address is 310-313H.
  • Page 58: Set Supervisor / User Password

    6VM7A+ Motherboard Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP...
  • Page 59: Ide Hdd Auto Detection

    BIOS Setup IDE HDD AUTO Detection ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. HARD DISKS TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Primary Master : Select Primary Master Option (N=Skip):N OPTION SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE 2(Y)
  • Page 60: Save To Cmos And Exit

    6VM7A+ Motherboard Save & Exit Setup ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP SUPERVISOR PASSWORD CHIPSET FEATURES SETUP USER PASSWORD POWER MANAGEMENT SETUP IDE HDD AUTO DETECTION PNP/PCI CONFIGURATION SAVE &...
  • Page 61: Exit Without Saving

    BIOS Setup Exit Without Saving ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP SUPERVISOR PASSWORD CHIPSET FEATURES SETUP USER PASSWORD POWER MANAGEMENT SETUP IDE HDD AUTO DETECTION Quit Without Saving (Y/N) ? N PNP/PCI CONFIGURATION SAVE &...
  • Page 62: Appendix

    6VM7A+ Motherboard Appendix Appendix A : VIA Chipsets Driver Installation A.VIA 4 in 1 Service Pack Utility: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. 1.Click “VT82C686A”...
  • Page 63 Appendix 7.Click “Next”. 8.Click “Next”. 9.Click “Finish” to restart.
  • Page 64 6VM7A+ Motherboard B. Hardware Monitor: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. 1.Click “VT82C686A” item. 2.Click “Hardware Monitor” item. 3.Click “Next”...
  • Page 65 Appendix Appendix B: BIOS Flash Procedure BIOS update procedure: Please check your BIOS vendor (AMI or AWARD) on the motherboard. It is recommended you copy the AWDFlash.exe or AMIFlash.exe in driver CD (D:\>Utility\BIOSFlash) and the BIOS binary files into the directory you made in your hard disk.【i.e:C:\>Utility\ (C:\>Utility : denotes the driver and the directory where you put the flash utilities and BIOS file in.)】...
  • Page 66 6VM7A+ Motherboard Appendix C: Acronyms Acor. Meaning ACPI Advanced Configuration and Power Interface POST Power-On Self Test Local Area Network Extended Capabilities Port Advanced Power Management Direct Memory Access Megahertz ESCD Extended System Configuration Data Central Processing Unit Symmetric Multi-Processing Universal Serial Bus Operating System Error Checking and Correcting...
  • Page 67 Appendix Acor. Meaning Peripheral Component Interconnect RIMM Rambus in-line Memory Module Dual Retention Mechanism Industry Standard Architecture Memory Translator Hub CRIMM Continuity RIMM...

Table of Contents