Wan Setup Options - NETGEAR WGT624v4 - 108 Mbps Wireless Firewall Router Reference Manual

108 Mbps Wireless Router WGT624 v4 Reference Manual
3. Select the service type (TCP or UDP) from the Service Type drop-down list.
4. Enter the outbound port number in the Triggering Port box.
5. Enter the inbound connection port information:
a. Connection type (TCP/UDP, TCP, or UDP)
b. Starting port
c. Ending port
For inbound connection information, see the game or applications manual or the product's
support website.
Editing or Deleting a Service
To edit an existing service:
1. From the Port Triggering page, select the service you want to edit from the list of services in
the Port Triggering Portmap Table.
2. Click Edit Service or Delete Service, as required.
3. If editing, change the service information on the Port Triggering - Services page, as described
in "Adding a New Service" on page

WAN Setup Options

The WAN Setup options let you configure a DMZ server, change the MTU size, and enable the
wireless router to respond to a ping on the WAN port.
Figure 5-3
5-6
5-5, and then click Apply.
v1.0, May 2007
Advanced Configuration