NETGEAR WGT624v4 - 108 Mbps Wireless Firewall Router Reference Manual page 56

108 mbps wireless router v4
Hide thumbs Also See for WGT624v4 - 108 Mbps Wireless Firewall Router:
Table of Contents

Advertisement

108 Mbps Wireless Router WGT624 v4 Reference Manual
This screen shows the following fields:
Table 4-1. Router Status Fields
Field
Account Name
Firmware Version
Internet Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Domain Name Server
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Wireless Port
Name (SSID)
Region
Channel
Mode
Wireless AP
Broadcast Name
4-2
Description
The host name assigned to the router.
The router firmware version.
Router Internet (WAN) port,
The Media Access Control address being used by the Internet (WAN)
port of the router.
The IP address being used by the Internet (WAN) port of the router. If no
address is shown, the router cannot connect to the Internet.
If DHCP is set to None, the router uses a fixed IP address on the WAN. If
set to Client, the router is configured to obtain an IP address dynamically
from the ISP.
The IP subnet mask used by the Internet (WAN) port of the router.
The address of the current domain name server.
Router local (LAN) port.
The Media Access Control address being used by the LAN port of the
router.
The IP address being used by the Local (LAN) port of the router. The
default is 192.168.1.1.
Identifies if the router's built-in DHCP server is active for the LAN
attached devices.
The IP subnet mask used by the Local (LAN) port of the router. The
default is 255.255.255.0
Router wireless port.
The wireless network name (SSID) used by the wireless port of the
router. The default is NETGEAR.
The geographic region where the router being used. It may be illegal to
use the wireless features of the router in some parts of the world.
The channel the wireless port is using. See the link in
Communications" in Appendix B
used on each channel.
The current mode (g & b, g only, or Auto 108 Mbps).
Indicates if the access point feature of the router is enabled. If it is
disabled, then wireless devices cannot connect to the network.
Indicates if the wireless router is broadcasting its SSID.
v1.0, May 2007
"Wireless
for information about the frequencies
Maintenance

Advertisement

Table of Contents
loading

Table of Contents