NETGEAR WGT624v4 - 108 Mbps Wireless Firewall Router Reference Manual page 58

108 Mbps Wireless Router WGT624 v4 Reference Manual
• Your router configuration settings (see
After some firmware updates you will need to reset the wireless router to its factory
default settings. If this is the case then you will need to configure the router.
2. Connect to the router, and select Router Upgrade from the router's main menu.
Figure 4-3
Warning: When uploading software to the wireless router, do not interrupt the Web
3. To check for new firmware, click Check.If the wireless router finds new firmware is available,
follow the onscreen prompts to download and install the new firmware.
4. To upload firmware from your computer onto the router, click Browse in the Router Upgrade
page, and browse to the location of the binary (.chk) upgrade file.
5. Click Upload.
When the upload is complete, your router will automatically restart.
Note: In some cases, you may need to reset to factory default and reconfigure the router
after upgrading.
4-4
browser by closing the window, clicking a link, or loading a new page. If
the browser is interrupted, it may corrupt the software.
v1.0, May 2007
"Configuration File Management" on page 4-5).
Maintenance