•
Telstra Bigpond, an Australian residential cable modem service
Note: The Telstra Bigpond setting is only for older cable modem service
•
Other, which selects PPPoE (Point to Point Protocol over Ethernet), the protocol used
by most DSL services worldwide.
Figure 1-7
Note: Not all ISPs are listed here. The ones on this list have special
–
Login and Password. This is the user name and password provided by your ISP. This
name and password are used to log in to the ISP server.
–
Service Name. If your connection is capable of connecting to multiple Internet services,
this setting specifies which service to use.
•
Connection Mode. This drop-down list selects when the router will connect to and
disconnect from the Internet.
Figure 1-8
Configuring Basic Connectivity
NETGEAR Wireless-N 300 Router JWNR2000 User Manual
accounts still requiring a Bigpond login utility. Telstra has
discontinued this type of account. Those with Telstra DSL accounts
and newer cable modem accounts should select No for Does Your
Internet Connection Require a Login.
requirements.
v1.0, February 2010
1-9