NETGEAR JWNR2000v1 User Manual page 19

The Checking for Firmware Updates screen appears unless you previously cleared the Check
for Updated Firmware Upon Log-in check box.
Figure 1-2
If the router discovers a newer version of firmware, the message on the left displays when you
log in. If no new firmware is available, the message on the right displays.
Figure 1-3
To automatically update to the new firmware, click Yes to allow the router to download and
install the new firmware file from NETGEAR.
Warning: When uploading firmware to the JWNR2000 router, do not interrupt the
When the upload is complete, your router automatically restarts. The update process typically
takes about 1 minute.
Configuring Basic Connectivity
NETGEAR Wireless-N 300 Router JWNR2000 User Manual
Web browser by closing the window, clicking a link, or loading a new
page. If the browser is interrupted, it could corrupt the firmware.
v1.0, February 2010
1-3