Hardware Features; Label; Back Panel - NETGEAR DM111PSPv2 User Manual

Hardware Features

Before you cable your modem, take a moment to become familiar with the label and the front
and back panels. Pay particular attention to the LEDs on the front panel.

Label

The label on the bottom of the modem shows the MAC address and serial number.

Back Panel

The back panel has the On/Off button and port connections as shown in the figure.
1
Figure 2. Back panel port connections
Viewed from left to right, the rear panel contains the following elements:
1. RJ-11 asynchronous DSL (ADSL) port for connecting the modem to a DSL line
Note: An ADSL port is capable of sending data over a DSL line at one
speed and receiving it at another speed.
2. Restore Factory Settings button
3. One Ethernet RJ-45 Ethernet port for cabling the modem to a computer
4. AC power adapter input
Broadband ADSL2+ Modem DM111PSPv2
2 3
Hardware Setup
8
4