Erase; View Modem Status - NETGEAR DM111PSPv2 User Manual

Erase


To erase the configuration and restore to factory defaults:
Under some circumstances (for example, if you move the modem to a different network or if
you have forgotten the password), you might want to erase the configuration and restore the
factory default settings.
Click the Erase button to reset the modem to its factory default settings.
Erase sets the user name to admin, the password to password, the LAN IP address to
192.168.1.1, and enables the modem's DHCP.
To restore the factory default configuration settings when you do not know the login password
or IP address, use the Restore Factory Settings button on the rear panel of the modem (see
Factory Settings on page 75).

View Modem Status


To view the modem status:
Select Maintenance > Router Status to display the following screen. The Router Status
screen provides the status and usage information described in the following figure.
The following fields are displayed:
Account Name. The host name assigned in the Basic Settings screen.
Firmware Version. The firmware version.
Broadband ADSL2+ Modem DM111PSPv2
Network Maintenance
48