Table of Contents
Advertisement
•
Type. Select the correct type for this service. If in doubt, select TCP/UDP. The options
are TCP, UDP, TCP/UDP.
•
Start Port and End Port. If a port range is required, enter the range here. If a single
port is required, enter the same value in both fields.
3.
Click Apply to save your changes.
Set the Time Zone
The modem uses the Network Time Protocol (NTP) to obtain the current time and date from
one of several network time servers on the Internet. You can check and set (if needed) the
time zone to ensure that time stamps match your local time.
To set the time zone:
1.
Select Security > Schedule to display the following screen:
2.
Select your time zone. This setting determines the blocking schedule and time-stamping of
log entries.
3.
If your time zone is in daylight savings time, select the Adjust for Daylight Savings Time
check box to add one hour to standard time.
Note:
If your region uses daylight savings time, select Adjust for Daylight
Savings Time on the first day and clear it after the last day.
Broadband ADSL2+ Modem DM111PSPv2
Security Settings
39
Hide quick links:
Advertisement
Table of Contents
