Control Locations - Monitor Closed - Dual XDVD8281 Installation & Owner's Manual

XDVD8281

Control Locations - Monitor Closed

1
2
3
4
5
6
Monitor Notes:
• This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will
not obstruct the dash, shifter or any other controls.
• Upon installation, do not attempt to move the monitor by hand. Use the
the OPEN button on the remote control.
• The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the
obstacle and press
9
OPERATION
Power/Mute
1
AM/FM Mode - Hotkey
2
Auto Store/Preset Scan
3
4 Mode
5 Menu
6 Rotary Encoder/Enter
7
DVD Mode - Hotkey
or OPEN again to resume the monitor open/close sequence.
Channel/Chapter/Track Up
8
Channel/Chapter/Track Down
9
Play/Pause
10
11 Info/Picture
12 Reset
13 Open/Close Monitor/Angle Adjust
button on the front panel only or
7
8
9
10
11
12
13