Dual XDMA6855 Installation & Owner's Manual page 8

XDMA6855 OPERATION
General Operation
Source Audio Memory
8
Audio Press rotary encoder momentarily to select between
Volume (default), Bass, Treble, Balance, & Fader.
VOLUME
Bass Press rotary encoder until BAS appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Treble Press rotary encoder until TRE appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Balance Press rotary encoder until BAL appears then rotate encoder
left/right to adjust (BAL L 1-BAL 00-BAL R 1).
BAL 00 represents equal balance
Fader Press rotary encoder until FAD appears then rotate encoder
left/right to adjust (FAD F 1-FAD 00-FAD R 1).
FAD 00 represents equal fader
Individual Bass and Treble settings are retained in memory
for AM, FM, CD, AUX, iPod and Bluetooth modes. This allows
you to save the Bass and Treble settings separately for each
mode.
Note Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
Reset Press RESET upon initial installation or if abnormal
operation occurs. The reset button is located behind the
faceplate.
BASS TREBLE BALANCE FADER