XDMA6415 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
(must be connected for Bluetooth functionality) FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XDMA6415 uses one 10 amp ATM fuse located beside the wiring connector.
Eject USB Port The XDMA6415 allows playback of your favorite MP3 and WMA files recorded on CD-R and CD-RW discs. Its powerful on-board DSP processor decodes the compressed audio while maintaining near-CD sound quality. An internal SRAM buffer provides ESP (Electronic...
Insert a 3.5mm connector in the front panel AUX port. Connect the other end of the 3.5mm connector to the headphone output of an audio device, MP3 player, etc. Press MODE to select AUX mode. The steering wheel interface input located on the back of the head unit allows connection to the Pacific Accessory ...
Mode DEMO ON Note: Refer to page XDMA6415 OPERATION Press to RESET the unit upon initial installation or if abnormal operation occurs. Reset button is located behind the faceplate. With the unit on, press and hold DISP until the clock begins to flash, then release.
Page 8
XDMA6415 OPERATION General Operation Press AUDIO/MENU momentarily to select between Volume Audio (default), Bass, Treble, Balance, & Fader. VOLUME BASS TREBLE BALANCE FADER SUBWOOFER Press AUDIO/MENU until BAS appears then rotate volume Bass left/right to adjust ( -6 minimum / +6 maximum).
Press AS/PS for less than two seconds to scan presets 1-6 Preset Scan on the current band, pausing for five seconds at each. Press AS/PS again to cancel. XDMA6415 OPERATION AM/FM Tuner Operation or TUNE momentarily to seek the or TUNE for more than two seconds, or TUNE ...
XDMA6415 OPERATION CD Player Operation Insert CD Eject CD Track Select Fast Forward and Reverse Pause Scan Repeat Random CD-R/CD-RW Compatibility With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Press to eject the CD. The unit will change to previous mode of operation (AM/FM, AUX, iPod, Bluetooth or USB).
Artist Icon Album Icon Folder Icon Character Support XDMA6415 OPERATION When an MP3/WMA encoded disc is first inserted, “READING” will appear in the display. Depending on the number of files and folders, this may take several seconds. Press DISP to select between track number/elapsed time (default), clock, track name, directory name, title, artist and album.
Page 12
XDMA6415 OPERATION CD Player Operation - MP3/WMA Files Direct Select and Navigate Modes Direct File Select Step 1 Step 2 Step 3 File/Folder Navigate Step 1 Step 2 Step 3 Step 4 *Folder Access (Up one level) Press SRCH for more than 3 seconds, to select between the following modes: • Direct File Select • File or Folder Navigate Press SRCH for more than 3 seconds, then release.
Page 13
Press INT again to cancel. Note: Folder repeat, folder random and folder intro functions are only available on MP3/WMA discs recorded with more than one folder. XDMA6415 OPERATION to select the previous folder. to select the next folder. icon will appear in icon will appear...
Page 14
XDMA6415 OPERATION CD Player Operation - MP3/WMA Files Media Compatibility Playback Order Compatible Recording Formats The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW • CD-DA • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management).
Page 15
Information Sampling Frequency Rates Transfer Bit rates MP3 Tag Display Recommended Settings XDMA6415 OPERATION An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only.
Character Support Play MP3/WMA files from most mass storage devices by connecting them to the XDMA6415's USB port. To connect a USB device, line up the connectors and insert the USB device into the port. The USB icon will appear in the display.
Page 17
File Random Folder Random File Intro Folder Intro XDMA6415 OPERATION Press SEARCH for more than three seconds, then release. "T*" will appear in the display. Use the volume knob to select the desired track number and press Note: When a file is accessed, the elapsed time will be displayed.
Page 18
XDMA6415 OPERATION USB Operation - MP3/WMA Files (Optional) Track Select Fast Forward and Reverse Pause Media Compatibility Playback Order Playback Capacity Press TRACK to skip to the beginning of the next track. Press TRACK current track. Pressing TRACK beginning of the previous track. Press and hold TRACK forward or reverse a track. / II to temporarily stop USB playback.
Page 19
Information Sampling Frequency Rates Transfer Bit rates MP3 Tag Display XDMA6415 OPERATION Only MP3 files with filename extension (.mp3) can be played. Only WMA files with filename extension (.wma) can be played. Do not attempt to play non-MP3/WMA files with the MP3/ WMA extension. 8kHz ~ 48kHz...
Page 20
Song Select Use the included 2-wire iPod cable to connect an iPod to the XDMA6415. Press MODE until "IPOD" appears in the display. The iPod will automatically begin playback. If a song is playing on the iPod before it is connected, it will continue to play.
Fast Forward and Reverse Pause Intro Repeat Random Character Support iPod Compatibility XDMA6415 OPERATION iPod Operation (Optional) ® Press and hold song. / II to temporarily stop playback. Press / II again to resume playback. Press Press INT to play the first 10 seconds of each song.
Bluetooth Operation ® Overview The XDMA6415 supports the HFP (hands-free profile), A2DP (advanced audio distribution profile) and AVRCP (audio video remote control profile). Preparation Before you can use a mobile device with this head unit, it must be connected and authenticated - commonly referred to as "pairing"...
Page 23
Hold Ending a Phone Call If the phone call was received, the head unit will return to previous mode when call is ended. XDMA6415 OPERATION Bluetooth Description once. An "_" will appear on the display. to begin dialing. to begin dialing the selected number. “DIALING” will appear on the head unit to receive a call.
Bluetooth Audio SPK 4-CH Bluetooth Streaming Audio Operation The XDMA6415 supports A2DP wireless streaming audio from your Bluetooth mobile device directly to your head unit. You can also control your music from the front panel of the head unit using AVRCP. To stream music to your head unit, your mobile device must support the following criteria: •...
This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.
XDMA6415 OPERATION Troubleshooting - General Problem Yellow wire not connected or incorrect voltage Unit will not turn on Red wire not connected or incorrect voltage (no power) Black wire not connected Fuse blown Speaker wires not connected Unit has power One or more speaker wires touching each (but no sound) other or touching chassis ground Yellow or red wire touching chassis ground Unit blows fuses...
CEA-2006 Power Standard Specifications (reference: 14.4VDC +/- 0.2V, 20Hz~20kHz) Power Output: 17 Watts RMS x 4 channels at 4 ohms and < 1% THD+N Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms) XDMA6415 OPERATION Specifications 10Hz-20kHz >65dB 1 Bit 87.5MHz-107.9MHz...