Table of Contents
Advertisement
XDMA6855 OPERATION
Bluetooth
Function
Making a Phone Call
Last Number Dialing
Receiving a Phone
Call
Refusing a Call
During a Phone Call
Audio Transfer
Call Waiting
Ending a Phone Call
0
Operation (Optional)
®
Press TALK once. An "_" will appear on the display.
Input the desired phone number using the 0-9, *, # buttons on the
head unit front panel. Press TALK to begin dialing.
A phone call may also be placed from your mobile device using the
keypad, phone book or speed dial.
To enter last number dialing mode, press TALK, then press TALK a
second time. The head unit will display "Last Number Dialing."
Press KEY 0 to cycle through the received, dialed or missed call
categories. Rotate the rotary encoder to cycle through the last 5
calls in the selected category. Note: You have 5 seconds to make a
choice before the head unit returns to Bluetooth standby mode.
Press TALK to begin dialing the selected number.
If an incoming call is detected, the head unit will automatically
switch to Bluetooth mode, muting any current audio.
The incoming phone number will scroll across the display, the
phone icon will flash on the display, and a ring tone will be audible
from the vehicle speakers. See Bluetooth Settings for speaker
configurations.
NOTE: The ring audio level will depend the mobile device and head
unit ring volume and audio settings. If the ringer on the mobile
device is off, you may not hear an incoming ring tone.
Press TALK on the head unit or BTM60 to receive a call. The phone
icon will illuminate solid.
To refuse an incoming phone call, press and hold MUTE for 3
seconds.
The head unit will display the elapsed time of the phone call.
The rotary encoder will adjust the volume of the call.
Press MUTE to select between microphone on (MIC ON) and
microphone off (MIC OFF).
To transfer the phone call between the head unit and the mobile
device, press and hold DISP for 3 seconds during a call. Tip:
transfer audio to your mobile device before turning the head unit
off.
When a second call is incoming, press TALK to activate call
waiting. The current call will be placed on hold, and the second call
will be active. Press TALK again to return to the first call.
Hold MUTE for 3 or more seconds to end a call.
If the phone call was received, the head unit will return to previous
mode when call is ended.
Description
Hide quick links:
Advertisement
Table of Contents
