Lawn Genie LD6 - CO M/R IRRIGATION 6 Zone Controller Timer Operator's Manual page 6

Selecting Days to Water
1. Set the dial to
WATER DAYS.
Select program A or B.
2.
3. The controller displays currently programmed day information.
This dial position provides three different water day options:
specific days of the week, odd days, or even days.
Selecting Specific Days of the Week
1. Press the + button to turn on a particular day of the week to
water. Press the - button to turn watering off for that day.
2. Press the 4 button to advance to the next day of the week/
3. Repeat steps 1 and 2 until all desired days have been selected.
The selected days will show at the top of the display to
indicate their status as ON.
Selecting Odd or Even Days
1. Press the 4 button for Odd Days and once again for Even
Days. The A will flash under your choice.
2. Press the + button to select or the - button to cancel either
Odd Days or Even Days. The previously selected days of the
week will revert to active if Odd Days or Even Days is
canceled.
Note:
The 31st of any month and the 29th of February of a
leap year, are always treated as Off days in Odd Days
watering.
Run
After programming, set dial to
execution of all selected programs and start times.
Note:
During the operation you will notice a 10 second delay
between the time a valve shuts off and the next valve opens.
This is to prevent water pressure damage to your system.
to enable automatic
RUN