Setting Time And Date - Lawn Genie LD6 - CO M/R IRRIGATION 6 Zone Controller Timer Operator's Manual

Return the dial to the Ru n position after you have completed
programming.
Note:
Programs A and B II I Each program is simply a set of
instructions that direct which valve to run for how long and
on which days. If you need four start times or extra long
watering times, you will need to use both programs.
However, in most cases one program will be sufficient.
III. Dial Programming
Use dial programming to set all elements of your program without
the help of guided programming or to simply review and update
existing program information.

Setting Time and Date

1. Set the dial to the TIME/DATE position.
2. Year: Use the + and - buttons to change the year.
3. Month: Press the 4 button to set the month. Use the + and -
buttons to change the month.
4. Day: Press the 4 button to set the day of the month. Use the
+ and - buttons to change the day of the month. The day of
the week, (e.g. Sunday, Tuesday, etc.), is automatically
indicated by the A pointing to the correct day.
5. Time: Press the 4 button to set the time. The hour, minute
and AM or PM will flash. Use the + and - buttons to change
the hour and minute time shown on the display. (Continuous
pressure on the button longer than 3 seconds causes rapid
change.)
Selecting Program Stati Times
Each program has two start times available. You may use the
second start time to water more than once per day.
1. Set the dial to the START TIM E position.
2. Select program A or B by pressing the A/B button.
3. Use the + and - buttons to change the start time. (Continuous
pressure on the button, longer than 3 seconds, causes rapid
change.)
4. Press the 4 button to select the next start time.