Table of Contents
Advertisement
ULTRA FLAME DIRECT VENT GAS STOVE
11. Install the vent casing and
the cover in place
12. Seal around the terminal to
prevent water leakage into
the house
13. Seal around the 8 in. pipe
to prevent cold air to get
into the house.
14. Seal around the cover slots
to avoid water infiltration
into the vent terminal;
15. Insert spring spacers into
the 5 in. flexible pipe;
16. Use all necessary rigid
sections
to
meet
specific needs. Fix 8 in.
pipes together with metal
screws;
17. Put
some
high
silicone on the stove's 5 in.
flange. Insert one locking
band on the 5 in. pipe and
insert it on the stove flange.
Make sure seal is perfect.
Tight the locking band
18. Fix the 8 in. pipe to the
stove
with
three
screws.
19. Fix Seal around the 8 in.
pipe to prevent cold air to
get into the house.
stove to the floor ;
20. Installation
is
complete.
your
temp
metal
your
now
5" LOCKING BAND
SCREWS
5" FLEXIBLE FLUE PIPE
13
8"RIGID A
Advertisement
Table of Contents
