Installation And Upgrades; Upgrading From A Previous Installation; Installation Of Server Software - Cisco TELEPRESENCE MANAGEMENT SUITE EXTENSION - FOR MICROSOFT EXCHANGE 2.2 Administrator's Manual

Installation and Upgrades

Completing the installation of Cisco TMSXE requires completing all the sections in this chapter. Each
section must be reviewed for both upgrades and new installations.

Upgrading from a previous installation

a. If you are running an earlier version of Cisco TMSXE and not changing Exchange Server
versions, you can continue with the installation steps as normal and the installer will handle your
existing version automatically.
b. If you are currently using Exchange Server 2003 and plan to upgrade to Cisco TMSXE without
changing to Exchange Server 2007, review the section Upgrading to Cisco TMSXE on
Exchange 2003 for pre-installation steps and information on changes in how your integration will
differ with the new Cisco TMSXE product before continuing.
c. If you are currently using Exchange Server 2003 and are upgrading your integration installation to
an Exchange 2007 Server, review the section Upgrading to Cisco TMSXE and Migrating to
Exchange 2007 for specific information on pre-installation needs changes in how your integration
will differ with the new Cisco TMSXE product before continuing.

Installation of Server Software

If reinstalling or upgrading the software on a server where Cisco TMSXE was previously installed, the
installer will automatically read the existing settings from the server's registry and skip steps where it
does not need additional user input. Because of this, not all steps listed below may be shown. If any
of the previous installation's values need to be changed, these can be changed using the
Configuration Utility post-installation.
Note: There are separate installers for 64bit installations and 32bit installations – Please use the
appropriate link for your server type.
1. Log into the Windows console of the Exchange Server where Cisco TMSXE will be installed.
Close all other running programs and any security/anti-virus software that may hinder installing
the software.
2. Launch Setup File—The Cisco TMSXE installer is located on the Cisco TMS installation media.
Open the index page by double-clicking browse.bat. Click the Install link start the installation
program.
3. Detecting a previous version—The installer will search for an existing installation of Cisco TMSXE
and if found, will prompt if you wish to upgrade the existing installation. Click Yes to continue. The
installer will automatically reuse settings it finds on the server.
4. Component Check—The installer will verify all the required Microsoft software components are
installed on the server, and if not will present a list of components that must be updated. The
installer will complete this task for you automatically (requires Internet Access), but may require a
restart of the server after the installation is complete.
5. Installation Wizard—A welcome window will appear on the screen. Click the Next button
6. Read and Accept the License Agreement—Read the License Agreement and select the 'I accept
the terms...' option. Click Next to continue. Selecting 'I do not accept the terms...' or clicking
Cancel will terminate the installation.
7. Set the installation folder—Select the destination folder where the software should be installed.
To accept the default location, click Next to continue. Otherwise, click Change to specify a
custom installation path and click Next to continue.
8. Select a Domain Controller—The installer will detect all domain controllers available to the
Exchange Server and present them in a drop-down list. The domain controller selected will used
by Cisco TMSXE software when interacting with Active Directory. Select your desired server from
the drop-down list if necessary, and click Next to continue
9. Configure the Service User for Exchange—Next the installer must configure the service account
to use on the Exchange Server. The installer's choices will vary depending if an existing service
account is found and if not, what choices you make to specify a new account. Each path is
outlined below:
Cisco TMSXE Administrator Guide 2.2 Page 7 of 60