Control Printing (Pause, Reset, Eject); Print Sample Pages; Change Status Monitor Settings; Change Printer Port - NEC 1260 - SuperScript - Printer User Manual

Chapter 5 : DOS Printing
From the Main Menu the following menus are
available:

Control printing (pause, reset, eject)

This menu lets you pause or continue printing,
reset the printer, or eject a page. (Pause and Reset
are only available for SuperScript 1260 printers
connected directly to your computer.)

Change printer settings

This menu lets you change a number of internal
SuperScript 1260 printer settings.
Change LaserJet IIP emulation
5-4 NEC SuperScript 1260 User's Guide
settings
This menu lets you select a number of settings
that are used when you print from DOS using
LaserJet IIP emulation mode. This mode is auto-
matically used whenever you print from DOS
software, do a printscreen, or copy a text file to the
printer.

Print sample pages

This menu lets you print two sample pages, one
showing your printer's internal settings and the
other showing your printer's internal fonts.

Change Status Monitor settings

This menu lets you change the Hot key used by
the DOS Status Monitor, and choose whether you
want the DOS Status Monitor to provide audible
warnings of printer problems.

Change printer port

If you have multiple printers connected to your
computer, you can use this menu to specify which
printer port your NEC SuperScript printer is con-
nected to.
Exit to DOS
This menu option exits the SuperScript 1260