Front And Rear View For Vigor2700G - Draytek 2700 Series Quick Start Manual

1 . 1 . 2 F r o n t a n d R
1 . 1 . 2 F r o n t a n d R
LED
WLAN On
Blinking
Off
QoS On
Off
Firewall On
Blinking
ADSL2+ On (Green)
Blinking (Green)
Blinking (Orange)
ACT (Activity) On
Blinking
LAN (1, 2, 3, 4) Orange
Green
Blinking
Interface
PWR
ON/OFF
Factory Reset
ADSL 2+
LAN 4 – 1
e a r V i e w f o r V i g
e a r V i e w f o r V i g
Status Explanation
Wireless access point is ready.
Ethernet packets are transmitting over wireless LAN.
The WLAN function is inactive.
The QoS function is active.
The QoS function is inactive.
The DoS function is enabled.
When encountered DoS attacks.
ADSL is show time.
The device starts handshaking.
The data is transmitting.
The router is powered on.
The router is powered on and running properly.
A normal 10Mbps connection is through its
corresponding port.
A normal 100Mbps connection is through its
corresponding port.
Ethernet packets are transmitting.
Description
Connecter for a power adapter with 12~15VDC.
Power Switch.
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Connecter for accessing the Internet through ADSL2/2+.
Connecter for local networked devices.
o r 2 7 0 0 G
o r 2 7 0 0 G
3
for Annex A
for Annex B