Telnet Command: Ipf View; Telnet Command: Ipf Set - Draytek Vigor2925 Series User Manual

E x a m p
E x a m p
> ip6 ntp -p 1
% Set NTP Priority: IPv6 First
T e l n e t C o m m
T e l n e t C o m m
IPF users to view the version of the IP filter, to view/set the log flag, to view the running IP
filter rules.
ipf view [-VcdhrtzZ]
S y n t a x
S y n t a x
Parameter
-V
-c
-d
-h
-r
-t
-z
-Z
E x a m p
E x a m p
> ipf view -V -c -d
ipf: IP Filter: v3.3.1 (1824)
Kernel: IP Filter: v3.3.1
Running: yes
Log Flags: 0x80947278 = nonip
Default: pass all, Logging: available
T e l n e t C o m m
T e l n e t C o m m
This command is used to set general rule for firewall.
ipf set [Options]
ipf set [SET_NO] rule [RULE_NO] [Options]
S y n t a x
S y n t a x
Parameter
Options
SET_NO
Vigor2925 Series User's Guide
1 – First Query IPv6 NTP Server.
l e
l e
a n d : i p f v i e w
a n d : i p f v i e w
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to show the version of this IP filter.
It means to show the running call filter rules.
It means to show the running data filter rules.
It means to show the hit-number of the filter rules.
It means to show the running call and data filter rules.
It means to display all the information at one time.
It means to clear a filter rule's statistics.
It means to clear IP filter's gross statistics.
l e
l e
a n d : i p f s e t
a n d : i p f s e t
D e s c r i p t i o n
D e s c r i p t i o n
Description
There are several options provided here, such as -v, -c
[SET_NO], -d [SET_NO],... and etc.
It means to specify the index number (from 1 to 12) of filter
set.
570