Buick PARKAVENUE 1996 Manual page 65

Table of Contents

Advertisement

To program the system:
1.
2.
3.
4.
Adjust the driver's seat to a comfortable and safe
driving position. Adjust both outside mirrors to suit
you. See "Outside Mirrors" in the Index.
Press the SET button on the driver's door armrest.
You will hear one beep.
Within five seconds, press one of the two memory
buttons on the armrest. You will hear two beeps to
confirm that the mirror and the seat positions are
entered into memory.
Press the UNLOCK button on the appropriate
transmitter within five seconds. You will hear
two beeps.
e second key transmitter can be programmed to
record a different seat and mirror position by following
the same steps.
If you prefer to program the exit seat position, which
moves the seat completely down and back, follow
these steps:
1. Press the SET button on the driver's door armrest.
You will hear one beep.
2. Press the EXIT button on the armrest. You will hear
one beep, but the seat will not move at this time.
3. Press the UNLOCK button on the appropriate
transmitter within five seconds. You will hear
two beeps.
This personal choice feature will work only when the
vehicle is in PARK
(P). A
beep will sound inside the
vehicle when the UNLOCK button on the transmitter is
pressed to move the seat and mirrors.
To turn this feature off, press SET, then UNLOCK
within five seconds.

Advertisement

Table of Contents
loading

This manual is also suitable for:

1996 park avenue

Table of Contents