Advertisement
a
.
.
,
.- .......
..,.,
To use the cover, grasp the handle and pull the cover
over the rear storage area. Insert the ends of the support
rod into the slots in the trim panel near the liftgate.
When the cover isn't in use, roll it back onto the roller.
Hold the handle and lift the support rod out of the slots.
Tug the cover lightly, then let it roll back automatically.
Don't release the handle until the cover has rolled
back completely.
To remove the cover, you can remove the cover and
roller assembly for extra cargo room. Slide back the
end sleeve and lift the assembly out of the notch in
the trim panel.
To replace the assembly, reverse the procedure.
Advertisement
