ACR Electronics RCL-600 SEARCHLIGHT Product Support Manual page 11

Remote control searchlight with joystick remote control panel

Hide thumbs Also See for RCL-600 SEARCHLIGHT:

Warning: Turn OFF the power witch when installing lamp.

1. Loosen the four (4) hexagon socket head cap bolts by using the attached

hexagon wrench and take the front frame off from lamp housing.

2. Turn the anode female collet counterclockwise to loosen the anode male

collet.

3. Take the xenon lamp out of the case. Hold the cathode side (-) before you

and insert the anode side (+) into the anode male collet securely.

4. Turn the female collet clockwise to tighten the lamp.

5. Insert the receptacle into the tab terminal securely.

6. Install the front frame with four (4) bolts.

Caution: If you handle the xenon lamp with dirty hands, wipe off the stain on the

glass with alcohol.

Y1-03-0139 Rev. C

Table of Contents

Rcl-600a