ACR Electronics NAUTICAST SAR AIS User Manual page 65

GPS Settings
The screen provides the means to switch the position pinning function of the internal GPS receiver
on and off. For vessels operating with SOG < 0,3 knots it is recommended to switch position pinning
off. Otherwise the internal GPS receiver may deliver wrong position information.
The data input field is fitted with the recommended default value (<on>). The M6 button is used for
toggling between the two modes of position pinning; the M5 button is used for saving the settings.
Attention: The system will be restarted after saving the settings.
N 1
************* GPS Settings *************
Position Pinning: [x]/[ ]
Note: The system will be restarted after
saving the settings.
----------------------------------------
Dynamic Keys: Sensor Settings
[M5] [Save]
[M6] [Change]
User Manual
o o
20' E 0 13' |1>0.10|2>1.30| *
on/off
| Save | Change |
Save Data Input [M8]
Change the
setting
1L
| Back
[Back]
64
Return to Menu
Configuration
Y1-03-0207 Rev. A