ACR Electronics NAUTICAST SAR AIS User Manual page 60

c) Alarm Settings
This screen allows the user to enable or disable the generation and display of Alarms. Alarms are
displayed in the Alarm Inbox (see Menu 5: Transponder Configuration, Submenu 3: Alarm Settings)
and on the ECDIS screen.
Note:
It is highly recommended to enable the Alarm Function.
N 1
************ Alarm Settings ************
Alarm generation: [*]/[ ]
Note: This setting also affects output
on ECDIS port.
----------------------------------------
Dynamic Keys: Alarm Settings
[M5] [Save]
[M6] [Change]
User Manual
o o
19' E 0 12' |1>0.10|2>1.30|3>1.80nm
on/off
| Save | Change |
Save Alarm Settings [M8]
Configure Alarm
Generation (on/off)
| Back
[Back]
59
Return to Submenu
Configuration
Y1-03-0207 Rev. A