Entering The Mmsi And Imo Numbers - ACR Electronics NAUTICAST SAR AIS User Manual

1.2 Entering the MMSI and IMO Numbers

Select from the Main Menu "Service Configuration" Number 6. Menu is SERVICE password
protected with default password "NAUT". Enter Service Password and use the up and down arrows
on keypad to select "Change MMSI / IMO" than press M5 "Select" or "by pressing number 3 on the
keypad.
Input your MMSI and IMO number and press Save to store data. Unit will reboot itself after pressing
Save. Continue to 4.2 after reboot.
Service Configuration Menu Example:
Note: MMSI and IMO Data input are limited to 9 characters.
User Manual
o o
N 1 19' E 0 13' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----|
|
Displ|
----------------------------------------
NUM| Select->|
o o
N 1 21' E 0 14' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
-----| |
| +- 1. Change Service Password
View | +- 2. User Password Settings
| +- 3. Change MMSI / IMO
-----| +- 4. Restore Factory Settings
|
Msg. |
|
-----|
|
Displ|
----------------------------------------
NUM| Select->|
| |<-Back
| |<-Back
5
Y1-03-0207 Rev. A