ACR Electronics NAUTICAST - REV M Manual page 58

a) Change Service Password
This screen provides a means to individually configure the Service Password. This password differs
from the User Password as it allows the user access to the Menu „Service Configuration".
A minimum of 6, a maximum of 8 characters are allowed. Should the new password include
numbers, use the shift key to generate them.
The process of configuring the Service Password is identical to that of User Password configuration
(see Menu 5: Configuration, Submenu 1: Change User Password).
o
N 1 25' E
******* Change Service Password ********
Enter new password :
Repeat new password:
----------------------------------------
| Enter
Dynamic Keys: Change Service Password
[M5] [Enter]
o
N 1 27' E
******* Change Service Password ********
Enter new password :****
Repeat new password:****
----------------------------------------
|
Dynamic Keys: Change Service Password
[M5] [Save]
58
o
0 18' |1>0.10|2>1.30|3>1.80nm
{Length: 4..8 characters}
| |
Confirm New Service
[M8]
Password Input
o
0 20' |1>0.10|2>1.30|3>1.80nm
{Length: 4..8 characters}
Save | |
Save New Service
[M8]
Password
| Back
Return to Submenu
[Back]
Service Configuration
| Back
Return to Submenu
[Back]
Service Configuration
Y1-03-0203 Rev. M