ACR Electronics NAUTICAST - REV M Manual page 29

This Confirmation Screen shows that the message was successfully transmitted on the Broadcast
Setting. By pressing [Back] the user automatically returns to the Message Editor for further
Messaging. The [SendTo] returns the user to the Vessel Listing, with the option of further Message
Writing to individual vessels.
o
N 1 19' E
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Broadcast Transmission Status
[+] OK, broadcast successful
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
|
In the case of failed transmission, the following screen appears. In this case, it is recommended to
retransmit the Broadcast Message.
o
N 1 19' E
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Broadcast Transmission Status
[-] Message could not be sent
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
|
Y1-03-0203 Rev. M
o
0 13' |1>0.10|2>1.30|3>1.80nm
| Send To | | <-Back
o
0 13' |1>0.10|2>1.30|3>1.80nm
| Send To | |<-Back
29