ACR Electronics NAUTICAST - REV M Manual page 55

Dynamic Keys: Replying to a LR Interrogation
[M5] [OK]
[M7] [Reply]
Sensor Settings
The screen provides the means to switch the sensor speeds. It allows the user to change sensor
interfaces from IEC61162-1 to IEC61162-2 settings. The data input fields are fitted with default
values. The [Up], [Down] buttons are used for menu navigation, the [Left] or [Right] buttons for
default data input.
Sensor Software Configuration (Service Password protected)
This is new in software version 2.0.1.x. The NAUTICAST™ offers the following configuration options:
Set up data speed 4800/9600/38400 baud.
Monitor the connected sensor inputs for each sensor channel.
Verify and edit the Sensor Configuration on the display screen.
Analyze the information received from the connected sensor devices.
Produce an electronic installation report.
Configuration of various NMEA protocols.
N 1
*********** Sensor Settings ************
BaudRate Sensor1:< 4800>
Ignored:$HC---$-----$-----$-----
1>Start Monitor>
BaudRate Sensor2:
Ignored:$HC---$-----$-----$-----
2>Start Monitor>
BaudRate Sensor3: 38400
Ignored:$HC---$-----$-----$-----
3>Start Monitor>
----------------------------------------
Dynamic Keys: Sensor Settings
[M5] [Save]
[M6] [Default]
[M7] [Analyce]
[M8] [Back]
Y1-03-0203 Rev. M
Notifies User of
current
[M8]
interrogation
Display
Message Editor
for LRI Reply
o o
19' E 0 12' |1> N/A|2>0.00|3>0.10nm
$-----$-----$-----$-----
4800
$-----$-----$-----$-----
$-----$-----$-----$-----
| Save | Default | Analyze | Back
Save Data Input
Restore the
default settings
Analye you NMEA
Data streem
Return to Menu
Configuration
Return to
[Back]
Vessel Listing
CRC: auto
CRC: auto
CRC: auto
Select Data Field
[Up] /
for Configuration
[Down]
Select Data Field
[Enter]
for Configuration
[Left] /
Configure Data
[Right]
55