Dometic RM1300 Installation & Operating Instructions Manual page 12

INSTRUCTIONS FOR MOUNTING THE DOOR PANEL
The refrigerator is normally delivered without
Before starting the mounting work check that the panel di-
mensions are in compliance with those given in the table and
read the instructions through. When mounting the panel, pro-
ceed as follows.
A. Remove the top decoration strip (2) with its two screws
(1).
B.
Insert one of the vertical edges of the panel into the
groove of the door frame (3).
C.
Bend the panel gently so that the free side of the panel
can be slipped into the corresponding groove of the door
frame (4).
D.
Push the panel downwards so that the lower horizontal
edge of the panel is fitted into the bottom groove (5).
E.
Between the upper edge of the panel and the door frame
there is now a gap which should be covered by the de-
coration strip.
F.
Put the strip across the door so that the gap is covered
and push it upwards (6).
The tabs on the inside of the strip should fit in behind
the flange of the door frame. Secure the decoratlon strip
by means of the two screws (1).
Panel dimensions
Thickness max. 5/32"
T
HEIGHT
L
MIN.
TYPE MAX.
RM 360 636 633
25" 24 7/8
RM 460 676
679
26 19/32
26 23/32
RM 660 879 876
34 1/2
34 5/8
RM 760 285
288
11 11/32 11 7/32
upper
RM 760
801 798
lower
31 17/32 31 13/32
RM 1300
360 357
14 3/16 14 1/16
upper
RM 1300
879 876
lower
34 5/8 34 1/2
door panel(s).
WIDTH
MAX. MIN.
513.5 mm
516.5
20 11/32 20 7/32 inch
550.5 547.5 mm
21 11/16 21 9/16 inch
547.5 mm
550.5
21 11/16 21 9/16 inch
550.5 547.5 mm
21 11/16 21 9/16 inch
550,5 547.5 mm
21 11/16 21 9/16 inch
598.5 595.5 mm
23 9/16 23 7/1 6 inch
598.5 595.5 mm
23 9/1 6 23 7/1 6 inch
HK-M 7937 820 47 96
FPC 119 RM-3-4-6-7-13