Warning - MINOURA HYPERRIM Manual

WARNING

Use two-wheeled bicycles only. Tandems may be used if balanced correctly.
!
Remove all oils and moisture from drive pulleys before use.
!
Keep both hands on handlebars at all times and maintain a normal riding position.
!
After you ride bicycle on the HyperRim trainer, remove all dirt and particles from rim,
!
so that you'll have effective braking on your future rides.
Check the couplings supporting the rear hub for damage
!
and cracks. Accidents may occur from cracked or damaged
couplings.
When using the HyperRim trainer, place it on a flat surface for safe training.
!
Adjust the drive-pulley height so they are even and touching the bicycle rim only (not
!
the tire).
Do not over tighten the hub-clamp handles. Over-tightening may cause damage to
!
the trainer or bicycle frame. The clamp handles should be a snug and secure fit. Do
not force!
Keep away from small children.
!
Before use, make sure all bolts and nuts are securely fastened.
!
When installing your bicycle, make sure the rim is located in the center of the frame.
!
This centering can be achieved by rotating the hub-clamp handles.
Keep hands and feet away from spinning rollers and wheels at all times.
!
Please obey warning signs.
- 2 -
X