EPL-N1200 Service Manual
3.2.2.10 Paper Take-up Sensor Removal
1.
Open the top cover. Remove the imaging cartridge. Cover the imaging cartridge to protect it
from light or place it in a dark area.
2.
Remove the high-voltage supply board. (Refer to Section 3.2.2.8.)
3.
Remove the main motor. (Refer to Section 3.2.2.9.)
4.
Remove the sensor lever.
5.
Remove the paper take-up sensor.
6.
Disconnect connector for the paper take-up sensor.
Figure 3-23. Paper Take-up Sensor Removal
Rev. A
Disassembly and Assembly
3-19