Disassembly and Assembly
3.2.2.16 Image Transfer Roller Removal
1.
Remove the fusing unit. (Refer to Section 3.2.2.12.)
2.
Remove the spacer.
3.
Slide the image transfer assembly to the left, lift up the right side, and remove the image
transfer assembly.
4.
Remove the image transfer Roller.
* Do not touch the surface of the image transfer roller with your bare hands.
Figure 3-31. Image Transfer Assembly Removal
Figure 3-32. Image Transfer Roller Assembly Construction
3-24
CAUTION
EPL-N1200 Service Manual
Rev. A