Table of Contents
Advertisement
The following screen shows On-chip Serial ATA assigned to "Enhanced Mode".
Note: Enhanced mode is available only for Windows2000 and XP.
<IDE Enhance Mode>
Onboard Device Setup
Scroll to Onboard Device Setup and press <Enter>. The following screen appears:
USB Controller
Enables the USB controller.
Options: Disabled, Enabled.
USB 2.0 Controller
Enables the EHCI (USB2.0) controller.
Options: Disabled, Enabled.
USB Keyboard Support
Enable/Disable support for USB keyboard under DOS.
Options: Auto, Enabled, Disabled.
BIOS
Display only
Page 4-11
Advertisement
Table of Contents
