Using The Bios Setup Program; Bios Setup Program Menu Bar - Intel D865GBF Product Manual

4 Using the BIOS Setup Program

The BIOS Setup program can be used to view and change the BIOS settings for the computer. The
BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST)
memory test begins and before the operating system boot begins.
NOTE
The BIOS Setup menus described in this section may not show the latest settings. For the latest
BIOS settings, refer to the Intel
Specification or the Intel World Wide Web site:
http://support.intel.com/support/motherboards/desktop
NOTE
For reference purposes, you should write down the current Setup settings. When you make changes
to the settings, update this record.
NOTE
The Setup menus described in this section apply to the desktop boards with BIOS identifier
BF86510A.86A. Boards with other BIOS identifiers might have differences in some of the
Setup menu screens.
Table 12 shows the BIOS Setup program menu bar.
Table 12.

BIOS Setup Program Menu Bar

Maintenance
Clears passwords
and Boot Integrity
Service (BIS)*
credentials, and
configures extended
configuration
memory settings
* For information about the BIS, refer to the Intel Web site at:
http://developer.intel.com/design/security/index1.htm
®
Desktop Board D865GBF/D865GLC Technical Product
Main Advanced
Allocates Configures
resources for advanced
hardware features
components available
through the
chipset
Security Power
Sets passwords Configures
and security power
features management
features
Boot Exit
Selects boot Saves or
options and discards
power supply changes to set
controls program options
57