BATTERY INITIAL CHARGING
1. BATTERY INITIAL CHARGING
Initial charging of the battery is required after filling electrolyte to improve the battery dura-
bility.
2. BATTERY INSTALLATION
Fill the electrolyte to the battery.
Leave the battery for 30 minutes.
Charge the battery by standard charging. This is necessary for reliability of the battery.
Install the battery to the motorcycle.
STANDARD CHARGING TIME
Do not use the battery without the battery initial charging.
Otherwise the battery service life may be shortened.
Do not permit to start or operate the motorcycle without the battery otherwise the elec-
trical system will be damage.
Always start or ride the motorcycle with the correct battery installed and connected.
: 1.2 A for 10 hours
CAUTION
WARNING
uses a battery ignition system.
2