5. Pull the old bulb straight out of the socket.
6. Put in a new bulb and push it straight in until it
is tight.
7. Replace the bulb retainer.
8. Replace the rear lamp assembly and tighten the
screws. You may want to use a magnetic screwdriver
when installing the screws.
9. Close the tailgate or rear doors.
6-38
4. Remove the screws from
the bulb retainer and
take the bulb retainer off
of the lamp assembly.
Windshield Wiper Blade Replacement
Windshield wiper blades should be inspected at least
twice a year for wear and cracking. See "Wiper Blade
Check" in Section 7 of this manual under Part B "Owner
Checks and Services" for more information.
yellowblue