Removing The Speaker Assembly - Compaq 12XL125 - Presario - K6-2 533 MHz Maintenance & Service Manual

Removing the Speaker Assembly

To remove the speaker assembly, complete the following steps:
1. Prepare the Notebook for disassembly
2. Remove the palmrest cover with TouchPad
3. Remove the keyboard
4. Remove the heatspreader
5. Remove the hard drive
6. Remove the display panel assembly
7. Remove the upper CPU cover
8. Remove the battery charger board
9. Disconnect the speaker cables from the system board as shown below and remove the
speaker assembly from the chassis.
To replace the speaker assembly, reverse these procedures.
P N M
RESARIO OTEBOOK AINTENANCE AND
Presario 1200 Series
Models: XL101-XL113, XL115, XL118-XL127
(pg 15).
(pg 17).
(pg 19).
(pg
(pg 31).
(pg
S G 1200XL S
ERVICE UIDE
(pg 10).
(pg 13).
27).
24).
ERIES
R S 33
EMOVAL EQUENCE