When The Local User Cannot View The Osd Flag; When The Mouse And Keyboard Lose Functionality After The Reset Ps/2 Button Is Pressed While Operating A Unix Based Platform; When The Mouse Does Not Align; When The Osd Goes Blank After A Mouse And Keyboard Have Been Reset Message Appears - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

2. Be sure that the cable connections are correct.
3. Be sure that the monitor is valid.

When the Local User Cannot View the OSD Flag

Preview the preferences selected in the OSD to determine if the local port display
has been disabled or set to time out. If the preferences are set not to display the
OSD flag or to have the flag time out, then the OSD flag does not display.
When the Mouse and Keyboard Lose Functionality
After the Reset PS/2 Button is Pressed While
Operating a UNIX Based Platform
The Reset PS/2 button is a Microsoft® Windows® based function. Restart the
desktop to gain mouse and keyboard functionality.

When the Mouse Does Not Align

Refer to the HP IP Console Switch Software Guide included on the CD provided
with your console switch.
When the OSD Goes Blank after a Mouse and
Keyboard Have Been Reset Message Appears
This happens when viewing a cascaded Compaq legacy console switch and an
HP IP Console Switch on separate monitors, and the mouse/keyboard reset
button has been pressed. The mouse and keyboard are locked up on the Compaq
legacy console switch. After approximately one minute, the Compaq legacy
console switch returns to normal functionality.
Troubleshooting 105