Table of Contents
Advertisement
Emergency Override Key/
Battery Replacement
Your safe is equipped with an Emergency Override Key which
allows immediate access in case you forget your Passcode or the
batteries need replacing.
1.
Locate and open the protective keypad cover on the front of
the safe.
2.
Using a small Phillips head screwdriver, remove the 2 screws
securing the small Emergency Override Key lock cover
located just below the digital keypad. Pull forward on
the cover to remove and set aside with the small screws.
3.
Insert the Emergency Override Key into the lock and turn
clockwise to the right.
4.
Turn the handle upwards to the right to open the safe.
NOTE: If batteries need replacing, proceed with step 5.
Otherwise, proceed to steps 6-8.
5.
Slide the battery compartment cover (located inside the
safe at the top of the door) forward and remove.
Remove and properly dispose of the (4) nonworking
batteries. Install 4 new "AA" batteries. Make sure
the batteries are installed in the proper direction as indicated
in the battery compartment. Slide the cover back into place.
6.
Remove the Emergency Override Key, and before replacing
the lock cover, enter your personal Passcode to make sure
the safe will open.
7.
Replace the lock cover using the 2 small screws and return
the Emergency Override Key to a secure place away from
the safe.
8.
Close and lock the safe door.
6
-
+
-
+
Hide quick links:
Advertisement
Table of Contents
