Standard Network Interface Controller - Compaq 195294-001 - ProLiant - ML370R Setup And Installation Manual

1-6 Proliant ML370 Generation 2 Server Setup and Installation Guide

Standard Network Interface Controller

Support for external tape drives and external storage through a
VHDCI SCSI connector on the rear panel
Support for hot-plug tape drives and hard drives in six hot-plug SCSI
drive bays
Support for non-hot-plug tape drives and hard drives in removable
media bays
ProLiant ML370 Generation 2 servers also support installation of the Smart
Array 5i Controller with:
A high-performance Low Voltage Differential SCSI (LVDS) interface
Two SCSI ports for up to six internal Ultra2 or Ultra3 SCSI hot-plug
hard drives
Support for up to 3 non-hot-plug SCSI drives internally or 14 external
drives without using an expansion slot
Support for LVDS devices on both channels
Support for external tape drives and external storage through an
auxiliary VHDCI SCSI slot on the rear panel
Support for RAID 0, 1, 0+1, and 5
32 MB of total memory for code, transfer buffers, and read-ahead cache
Maximum data transfer rates of 160 MB/s on each SCSI bus
The NIC provided with your ProLiant ML370 Generation 2 server is an
Integrated Compaq NC3163 Fast Ethernet NIC with the following features:
Dual 10/100 Mb/s data transfer rate integrated on a PCI local bus
Auto-sensing LAN capable at either 10 or 100 Mb/s
Full-duplex ethernet for two-way transmission
Support for PXE technology
Support for WOL functionality