Dodge 2009 Caravan Owner's Manual page 174

172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
11. Select Remote Linked to Memory in the Electronic
Vehicle Information Center (EVIC) and enter "Yes". Refer
to the "Customer-Programmable Features" in the "Elec-
tronic Vehicle Information Center (EVIC)" section for
more information.
12. Repeat the above steps to set the next Memory
position using the other numbered Memory button or to
link another RKE transmitter to memory.
Memory Position Recall
NOTE: The vehicle must be in PARK to recall memory
positions. If a recall is attempted when the vehicle is not
in PARK, a message will be displayed in the EVIC.
To recall the memory settings for driver one, press
MEMORY button 1 on the driver's door or the UNLOCK
button on the RKE transmitter linked to memory position
1.
To recall the memory setting for driver two, press
MEMORY button 2 on the driver's door or the UNLOCK
button on the RKE transmitter linked to Memory Position
2.
A recall can be cancelled by pressing any of the
MEMORY buttons on the driver's door during a recall (S,
1, or 2). When a recall is cancelled, the driver's seat,
driver's mirror, and the pedals stop moving. A delay of
one second will occur before another recall can be
selected.
To Disable RKE Transmitter Linked to Memory
1. Turn the ignition switch to the OFF position and
remove the key.
2. Press and release MEMORY button 1. The system will
recall any memory settings stored in position 1. Wait for
the system to complete the memory recall before continu-
ing to Step 3.