Backing Up Your Configuration; Upgrading The Firmware - Cisco QuickVPN - PC Administration Manual

Getting Started
Basic Tasks
STEP 5
STEP 1
STEP 2
Cisco SA 500 Series Security Appliances Administration Guide
The User Type and Group cannot be changed for this account.
NOTE
• Check to Edit Password: Check this box to enable the password fields.
• Enter Your Password: Enter the current password. The default password
for this new security appliance is cisco.
• New Password: Enter a password that contains alphanumeric, '—' or '_'
characters.
• Confirm Password: Enter the password again.
• Idle Timeout: Enter the time in minutes that the user can be inactive before
the login expires. You can enter any value from 0 to 999.
Click Apply to save your settings, or click Reset to revert to the saved settings.

Backing Up Your Configuration

At any point during the configuration process, you can back up your configuration.
Later, if you make changes that you want to abandon, you easily can easily revert
to a saved configuration. For more information, see
Working with Configuration Files, page

Upgrading the Firmware

Before you do any other tasks, you should upgrade your firmware to ensure that
you are using the latest version. You can upgrade from a file stored on your
computer, your network, or a USB key.
In the Upgrade Firmware section of the Getting Started (Basic) page, click the link:
Check for updates and download if new
When the web page appears, download the latest software.
You also can find new firmware for the SA 500 Series Security Appliances at
NOTE
the following website:
199.
www.cisco.com/go/sa500software
Upgrading Firmware and
1
26