Table F-2
Specifications (continued)
Maximum Altitude (unpressurized)
Operating
Nonoperating
Heat Dissipation
Maximum
Typical (idle)
Power Supply
Operating Voltage Range
Rated Voltage Range
1
Rated Line Frequency
Power Output
Rated Input Current (maximum)
1
This system utilizes an active power factor corrected external power supply. This allows the system to pass the CE mark
requirements for use in the countries of the European Union. The active power factor corrected power supply also has the
added benefit of not requiring an input voltage range select switch.
1
10,000 ft
3,048 m
30,000 ft
9,144 m
549 BTU/hr
132 kg-cal/hr
133 BTU/hr
33.5 kg-cal/hr
90-264 VAC
100-240 VAC
50-60 Hz
135 W
2.4A @ 100VAC
1.2A @ 200VAC
USDT Specifications
159