Sharp ER-A450T Programming Manual page 18

No Procedure on P.C. side
Install "02FD.EXE" on the P.C.
1
ALL RAM Data UpLoad : Go to "2"
ALL RAM Data DownLoad : Go to "9"
2 ALL RAM Data UpLoad ( ER-A450T -> PC )
"Execute "02FD.EXE" on P.C"
*Don' t execute the other Software at the same time.
3
Set the Communication method by "Setting" Button."
4
Push "OK" Button.
Push "POS -> PC" Button.
5
And Select the Receiving File.
Communication starts.
7
UpLoad is completed.
8 The initial Window is shown.
"Push "Exit" Button."
9 ALL RAM Data Download ( PC -> ER-A450T )
No Procedure on ER-A450T side
2 Place the SRV key in the SRV mode.
Entry of JOB#996 in the SRV mode
996 @/FOR
6
ER-A450T shows
00000
UpLoad is completed.
8
9 Place the SRV key in the SRV mode.
CA/AT