HP rp5800 Maintenance And Service Manual page 63

5. Open both latches of the memory module socket (1), and insert the memory module into the
socket (2).
Figure 7-9 Installing a DIMM
NOTE: A memory module can be installed in only one way. Match the notch on the module
with the tab on the memory socket.
Populate the black DIMM sockets before the white DIMM sockets.
For maximum performance, populate the sockets so that the memory capacity is spread as
equally as possible between Channel A and Channel B. Refer to
information.
6. Push the module down into the socket, ensuring that the module is fully inserted and properly
seated. Make sure the latches are in the closed position (3).
7. Repeat steps 5 and 6 to install any additional modules.
8. Rotate the drive cage back down to its normal position.
CAUTION: Be careful not to pinch any cables or wires when rotating the drive cage down.
9. Reassemble the computer.
The computer should automatically recognize the additional memory the next time you turn on the
computer.
Memory on page 50 for more
Memory 53